Home » Keyboard Platforms » Keyboard Platform Accessories

Keyboard Platform Accessories

Adjustable Corner Diagonal

• Converts 90º & curved corners (up to 9”) to usable work areas
• Allows use of adjustable arm and keyboard platform when the natural corner of the worksurface does not permit it
• Adjusts to fit 1” to 2¼” thick worksurfaces
• Clamping design eliminates spacers, saving installation time
• Works with the Pinnacle 2 and Pinnacle AD arms
• Works with the following Workrite platforms: 2180S, 2181SN, 2100FT, 317RL, 2110D, 2110RL, 180 and with all Idea at Work platforms except In-Line
• Dimensions: 12” W × 1¾” H

Compact Corner Diagonal

• Converts 90º corners and diagonal corners less than 17” to usable work areas
• Moves operator closer to worksurface
• Designed specifically to fit model #321RL with Pinnacle 2 Arm
• Works with the Pinnacle 2 and Pinnacle AD arms
• Works with the following Workrite platforms: 188, 488, 2180S, 2181SN, 2100FT, 317RL, 2110D, 2110RL, 2110RLN, 321RL, 180, 187, 487 and with all Idea at Work platforms except In-Line
• Dimensions: 17½” W × 8¾” D × 1½” H

Corner Rectangle

• Converts 90° corners and corners with keyboard cutouts to usable diagonal corners
• Works with all Workrite keyboard arms
• Works with the following Workrite platforms: 188, 488, 2180S, 2181SN, 2100FT, 317RL, 2110D, 2110RL, 2110RLN, 321RL, 180, 187, 487, 383, 385RL, 386RL, 482, 483, 485, 486, 182, 183, 185, 186 and with all Idea at Work platforms
• Dimensions: 26” W × 15” D × 1½” H

Positive Tilt Lockout Kits

• For “no positive tilt” ergonomics applications.
• No tools required to install
• Restricts arm tilt to a range of 0º to –15º

Swivel Plate

• Mounts between adjustable arm and platform 
• Provides an additional 45º pivot point for extra adjustability and special storage or mounting requirements
• Works on all Workrite arms and AKP115

Mounting Spacers

• For mounting adjustable arms when edge is thicker than the rest of the worksurface
• Works with all Workrite and Idea at Work arms
• Select 16” or 21” length and desired thickness

Track Bridge

• For mounting adjustable arms when the front edge is thicker than the interior of the worksurface
• Works with all Workrite and Idea at Work arms
• Quantity 3 per pack
• Requires ¾” spacer when used on a Sierra Crank table with 22” track