Skip Navigation.

Workcenter Ordering Information

How To Order

All orders must be submitted in writing. Send orders to Customer Service (Fax: 800-930-8989) and include for every item ordered:

  1. Model (eg SE727224)
  2. Switch Position (eg U) (Sierra Sit-to-Stand only)
  3. Metal Finish (eg S)*
  4. Laminate (eg SG241)*
  5. Edge Treatment (eg 01)*
    (Example: SE727224-U-S-SG241-01)

*For available metal finishes, laminates and edge treatments, see Options.

For Thermofoil laminates: Minimum quantity 25 tables per base model number (i.e. SE6030); consult factory for quote on larger projects.

For base-only configurations, only the model #, switch position and metal finish is required. For base-only units, switch must be located under worksurface (U)
(example: SE727224-U-S)

Note, dimensions provided above are nominal. Actual widths of all tables are reduced by 2" and depths by 1". For example, a nominal 72" x 72" x 24" large corner table has an actual dimensionof 70" x 70" x 23", and a 72" x 30" rectangular table has an actual dimension of 70" x 29".

Dual Surface specifications: Front surface laminate and trim matches main worksurface.

Keyboard cutout: Front surface adjusted using fixed mount Pinnacle 2 Arm with 0" to -6" height range and -15° to +10° tilt range.

If switch position not specified, under mount version (U) will be provided.
All tables have adjustable glides at front and back of each foot, providing ½" adjustment.

Table surfaces are pre-drilled with mounting location for bases and dual surface platform (if any). A joining kit is provided for all three leg tables with a two piece top.

All tables and bases ship unassembled. Weight information is shipped weight for laminate option only.

Control box powered by 120V / 60Hz. May draw 6 amps maximum under full load, idle current is typically 20mA.
10ft grounded power cord with IEC type connection at control box provided.
Cable management spool provided to manage excess control cables; optional cable mount accessories are available – see Accessories.

Application Tips
Mobile pedestals 21½" H x 17" D and 21½" H x 18¾" D will fit under 24"D and 30" D tables, respectively. To accommodate deeper pedestals, contact factory for custom leg placement.

Moving worksurfaces can collide with other components. Installation of overhead storage or wall mounted accessories in the path of the worksuface is not recommended. Workrite has tool bars which move with the worksurface and can accept a variety of desk accessories – see pages 62-64.

Note for Base Units Only

For safe operation of the moving worksurface in close proximity to walls or other worksurfaces, we recommend the following:

  • Reduce the width of the worksurface by two inches.
  • Reduce the depth of the worksurface by one inch.
  • Customer assumes full responsibility for proper clearances.

Lead Times

Classic Collection Laminates: Ships in 10 working days

Designer Collection Laminates: Ships in 15 working days

Thermofoil Laminates: Ships in 6 weeks, minimum quantities apply

Note: All lead times quoted are for the models shown in current catalog. Please call for lead times on custom tables.